At Aerox, we follow a meticulous process, from feasibility studies to continuous monitoring after installation. With each step, we guarantee optimal odor control, tailored to your company’s specific challenges. Our dedication ensures seamless integration and maximum effectiveness in any industry.
To ensure that our Aerox-Injector offers the required odor reduction, a feasibility study will be conducted. This study consists of the following steps:
- Send questionnaire to identify details of application.
- Interview in which the further needs of the applicant will emerge
coming. An explanation of the technology will also be given.
- Through the expertise of our chemists and technologists, it will be concluded
Whether the application is feasible.
The second step in the feasibility study will be a test. Aerox can perform two types of on-site testing.
1. The Micro Aerox Injector is the smallest Aerox odor control unit designed for indicative on-site testing. Through this test, process air can be treated. The treated process air can then pass through your internal odor panel
2. A continuous quantity of the process air will be treated with the mini test. This allows samples to be taken, before and after the mini test, by an independent odor measurement company. By performing this test at different settings, Aerox can provide the best advice for the specific odor problem.
After the test has determined the capacity required for good odor reduction, design can begin. To arrive at the right design, Aerox’s technical department will work with the customer to determine the configuration.
Test for transportation
Before we send the Aerox injector to the customer, a Factory Acceptance Test is performed. With this test, we can confirm that the Injector is fully functioning properly and ready to solve the odor problem. The customer is invited to be present at this test and can receive instruction on the operation of the system if desired. After all tests have been passed, the system is transported to the customer.
Installation and commissioning
Once the system has arrived on site and installed, Aerox will perform commissioning. When the Aerox-Injector is fully operational, the settings can be adjusted to achieve the best odor reduction in all situations. The commissioning process also includes the training of local operators. The in-house operators must be able to operate the basic functionalities of the Aerox injector.
During this final step, we also perform a Site Acceptance Test. This test shows whether the machine is fully functional and nothing has gone wrong in transportation.
Service and maintenance
After the sale and commissioning, our team will be ready to assist as needed.
The Aerox Injector will be continuously monitored via the IoT platform with online dashboard by our service coordinator to make sure the machine is working properly. In the unlikely event that there are problems, they are noticed immediately and remedied as soon as possible.
Maintenance is planned and performed in close consultation with the customer. Our
Aerox-Injector is designed so that maintenance can be performed without stopping the production process.
More about our technology?
With more than 25 years of experience in cold plasma injection technology, Aerox has gained a lot of experience and incorporated it into our Aerox injectors. Consequently, our products are spread all over the world, including some that are still extremely active in odor control after 20 years.
The Aerox-Injector is the most durable industrial odor reduction solution. Specifically designed in view of the environment and the possibility of recycling almost all parts. All an Aerox injector needs is a little bit of energy.
The Aerox-Injector is an innovative odor control system based on injection technology that is installed at the end of a production process or in the chimney. Already more than 250 plants around the world benefit from our proven effective technology.
The Aerox-RCO is an innovative emission control system based on catalytic technology that is installed at the end of a production process or in the stack. The Aerox-RCO (Regenerative Catalytic Oxidizer) destroys emissions.